|Quantity||Gross Weigh||Volume Weight||Delivery Date|
1. Two years warranty, expect the fiber optic only.
2. Constant light intensity output .
3. Germany imported fiber optic material.
4. Super fast charging system, 1.5 hour fully charged.
5. Using USA imported chip, stable performance.
6. Connect with 24V power supply directly.
1. Two working modes:
Normal curing mode with intensity 1200mw/cm2;
Fast curing mode(for Orthodontic use) with intensity 1800mw/cm2.
5s,10s,15s,20s,25s,30s（Normal curing mode）
1s,3s(for Orthodontic use)
Connect with 24V directly, 110V AND 220V ARE NOT ALLOWED, OTHERWISE WILL BE BURNT.
We always focus on good quality since 2010, all curing light have 2 years warranty, only exceptthe fiber optic tip.Even the tube are using silicon material, more durable.
USA imported chip
The key part – power chip are imported from USA, to make sure products can work stably.Even input voltage change suddenly, it will not burn the PCB, The chip will stop input automatically to protect the whole PCB.
High articulation fiber tip
Aluminum material end will send out the heatness properly which created by LED bulb, it will protect the leb bulb.High articulation fiber optic tip will guide the blue light more efficiently
Simple connecting with Chair
Connect the cable with 24V or less than 24V(10V,12V both OK) from the dental chair. Much more easier for clients to connect with dental chair.Not 220V allowed!Inform us if you need 220V.